Machine Maintenance Workshop

Description du cours

Ensure your machine reaches your expected performance!

This three-day course is designed for machine maintenance personnel responsible for upkeep, troubleshooting, and preventive maintenance of injection molding machines and ancillary equipment. It is common in the industry that maintenance personnel are not trained to recognize how machine performance affects final part quality. The performance of the press is critical to a molder’s ability to deliver consistent parts. Maintenance personnel must understand how to identify and fix press performance concerns in order to optimize press tuning.

Les temps forts du cours

  • Screw and barrel measurement and documentation
  • Screw and barrel wear evaluation
  • Platen parallelism
  • Hydraulic systems: closed and open loop systems, variable displacement pumps, and proportional valves
  • Electric machines: servo and frequency drives
  • Testing for proper material dryer operation
  • Proper sizing of plant cooling system

Upon completion of this course, personnel should be able to conduct and evaluate the test procedures in the above. In addition to the tests performed the knowledge gained in the class will assist the student in finding root cause for poor machine performance.

Participants will be able to effectively communicate with production personnel in regards to machine maintenance issues and their impact on process repeatability and part quality.

Maintenance personnel will be able to evaluate machine capability in the following areas:

  • Load sensitivity
  • Velocity linearity,
  • Dynamic check ring repeatability
  • Static barrel and check ring repeatability
  • Hydraulic pressure response
  • Pressure linearity.

Course Length: 3 days

Prérequis du cours

Public Classes – No prerequisite

In-Plant Classes – A functioning eDART System running Version 9 software must be available for use during the class. (Arrangements can be made for RJG to provide an eDART, but this must be prearranged with the trainer in advance)

Start DateEnd DateNomLangueEmplacementOpen SeatsPrix
2021/06/022021/06/04Accelerated Tool Launch2$1,995.00Register
2021/06/222021/06/24Advanced eDART® Training5+$1,095.00Register
2021/04/202021/04/22Advanced eDART® Training4$1,095.00Register
2021/08/102021/08/12Advanced eDART® Training1$1,095.00Register
2021/09/082021/09/10Advanced eDART® Training5+$1,095.00Register
2021/08/032021/08/05DECOUPLED MOLDING® Workshop5+$1,495.00Register
2021/05/102021/05/12DECOUPLED MOLDING® Workshop41,495.00Register
2021/06/292021/07/01DECOUPLED MOLDING® Workshop41,495.00Register
2021/08/172021/08/19DECOUPLED MOLDING® Workshop41,495.00Register
2021/09/212021/09/23DECOUPLED MOLDING® Workshop41,495.00Register
2021/10/122021/10/14DECOUPLED MOLDING® Workshop41,495.00Register
2021/12/072021/12/09DECOUPLED MOLDING® Workshop41,495.00Register
2021/12/142021/12/16DECOUPLED MOLDING® Workshop41,495.00Register
2021/08/172021/08/20Fundamentals of Systematic Injection Molding5+$1,995.00Register
2021/05/172021/05/20Fundamentals of Systematic Injection Molding5+1,390.00Register
2021/06/282021/07/01Fundamentals of Systematic Injection Molding5+1,390.00Register
2021/08/162021/08/19Fundamentals of Systematic Injection Molding5+1,390.00Register
2021/10/112021/10/14Fundamentals of Systematic Injection Molding5+1,390.00Register
2021/12/132021/12/16Fundamentals of Systematic Injection Molding5+1,390.00Register
2021/05/102021/05/13Fundamentals of Systematic Injection Molding5+£1,195.00Register
2021/07/262021/07/29Fundamentals of Systematic Injection Molding5+£1,195.00Register
2021/06/222021/06/25Fundamentals of Systematic Injection Molding0$1,995.00

Class is FULL
Join Waitlist

2021/09/212021/09/24Fundamentals of Systematic Injection Molding1$1,995.00Register
2021/07/052021/07/08High Performance Moulding5+£1,195.00Register
2021/09/272021/09/30High Performance Moulding5+£1,195.00Register
2021/04/192021/04/30Master Molder® I0$3,895.00

Class is FULL
Join Waitlist

2021/07/052021/07/16Master Molder® I2$3,895.00Register
2021/09/272021/10/08Master Molder® I5$3,895.00Register
2021/10/252021/11/05Master Molder® I43,895.00Register
2021/06/072021/06/18Master Molder® I5£3,765.00Register
2021/05/172021/05/28Master Molder® I0$3,895.00

Class is FULL
Join Waitlist

2021/06/072021/06/18Master Molder® I0$3,895.00

Class is FULL
Join Waitlist

2021/05/172021/05/28Master Molder® II0$4,295.00

Class is FULL
Join Waitlist

2021/05/032021/05/14Master Molder® II1$4,295.00Register
2021/10/182021/10/29Master Molder® II0$4,295.00

Class is FULL
Join Waitlist

2021/12/312021/12/31Math for Molders - eLearning$395.00Register
2021/12/312021/12/31Math for Molders - eLearning$395.00Register
2021/12/312021/12/31Math for Molders - eLearning$395.00Register
2021/06/072021/06/11Mold Design for Injection Molding5+$1,895.00Register
2021/06/012021/06/03Mold Design for Injection Molding5+£975.00Register
2021/05/112021/05/14Online eDART® Training5+$595.00Register
2021/07/062021/07/09Online eDART® Training5+£625.00Register
2021/11/232021/11/26Online eDART® Training5+£625.00Register
2021/04/192021/04/23Online Fundamentals of Systematic Injection Molding5+£1,195.00Register
2021/05/242021/05/28Online Fundamentals of Systematic Injection Molding5+$1,995.00Register
2021/05/312021/06/04Online Fundamentals of Systematic Injection Molding5+$1,995.00Register
2021/08/092021/08/13Online Fundamentals of Systematic Injection Molding5+£1,195.00Register
2021/08/302021/09/03Online Fundamentals of Systematic Injection Molding5+$1,995.00Register
2021/09/132021/09/17Online Fundamentals of Systematic Injection Molding5+$1,395.00Register
2021/10/112021/10/15Online Fundamentals of Systematic Injection Molding5+£1,195.00Register
2021/12/062021/12/10Online Fundamentals of Systematic Injection Molding5+£1,195.00Register
2021/05/042021/05/07Online Injection Molding Essentials5+$795.00Register
2021/06/012021/06/04Online Injection Molding Essentials5+$795.00Register
2021/10/192021/10/21Online Intro to Part Design5+£975.00Register
2021/10/262021/10/26Online Introduction to Injection Moulding5+£410.00Register
2021/08/032021/08/05Part Design for Injection Molding5+$1,895.00Register
2021/04/272021/04/29Systematic Molding for Liquid Silicone Rubber5$1,495.00Register
2021/10/262021/10/28Systematic Molding for Liquid Silicone Rubber0$1,495.00

Class is FULL
Join Waitlist